High moisture extrusion of lupin protein

influence of extrusion parameters on extruder responses and product properties

verfasst von

Megala Palanisamy, Knut Franke, Ralf G. Berger, Volker Heinz, Stefan Töpfl

Abstract

BACKGROUND
High moisture extrusion (HME) of lupin protein concentrate and isolate (50:50) mixture was performed by varying the extrusion parameters, such as barrel temperature (138–180 °C), water feed (40–68%) and screw speed (400–1800 rpm). The effect of extrusion parameters on extruder responses [die pressure, product temperature, torque and specific mechanical energy (SME)] and product properties [colour, cutting force, cooking yield, microstructure and in vitro protein digestibility (IVPD)] was evaluated.

RESULTS
The multiple regression analysis of the results revealed that the water feed had a significant negative linear effect on the extruder responses considered, as well as on colour difference and cutting force of extrudates. Screw speed had a positive linear effect on product temperature, SME and cooking yield. Barrel temperature affected extruder responses and product properties to a lesser extent. Scanning electron microscopy showed that denser microstructure and higher number of fibre layers were created by increasing temperature and screw speed along with decreasing water feed. The results of IVPD of selected extrudates showed that the increase in barrel temperature decreased the IVPD, whereas the increase in water feed resulted in higher IVPD. The screw speed had no significant effect on IVPD.

CONCLUSION
The study demonstrates that the use of lupin protein is feasible to produce meat analogues with HME which could enhance the possibilities to meet the growing protein demands for human consumption.

Organisationseinheit(en)

Institut für Lebensmittelchemie

Externe Organisation(en)

Deutsches Institut für Lebensmitteltechnik e.V.

Typ

Artikel

Journal

Journal of the Science of Food and Agriculture

Band

99

Seiten

2175-2185

Anzahl der Seiten

11

ISSN

0022-5142

Publikationsdatum

21.02.2019

Publikationsstatus

Veröffentlicht

Peer-reviewed

Ja

ASJC Scopus Sachgebiete

Biotechnologie, Lebensmittelwissenschaften, Agronomie und Nutzpflanzenwissenschaften, Ernährung und Diätetik

Elektronische Version(en)

https://doi.org/10.1002/jsfa.9410 (Zugang: Geschlossen)